[China Glass Net] Glass doors are increasingly favored by young people. On the one hand, they do not occupy too much space for hidden door treatment, and the other side of the glass has a sense of transparency, which will not affect the lighting, and is beautiful. However, the installation of the glass door is also very skillful and cannot be installed casually. 1: Positioning and paying line: The glass door is composed of fixed glass and movable glass door leaf, and the positioning of the line is unified. 2: Limiting groove at the top of the mounting frame: The width of the limiting slot should be greater than 2-4mm for the glass thickness and 10-20mm for the groove depth. When installing, firstly pull out the two metal decorative board edges from the drawn line, and then press the side line to install the limit slot at the top of the door frame. 3: Install the wooden bottom of the metal veneer: first fix the square wood on the ground, then stick the metal veneer to the wood with the multifunctional glue. The square wood can be directly nailed to the pre-buried wooden brick, or by expanding The method of bolting is fixed. 4: Install the vertical door frame: connect the center line of the bullet to the door frame, then use the plywood to determine the shape and position of the door frame column, and then outsource the metal decorative surface. 5: Install the glass: Use a glass suction machine to suck the thick glass, then hold the suction cup and lift the thick glass plate by 2-3 people to move to the installation position. 6: Fixing glass: Two small square wooden strips on the bottom and side of the wooden block are placed on the middle door, the square wood strip is about 4mm away from the glass plate surface, and then the multi-purpose glue is applied on the square wooden strip. Stick the veneered metal on the square strip. 7: Injection glass seal: In the gap between the top limit groove and the bottom bracket, and the gap between the thick glass and the frame column, the glass seal is injected. 8: Docking between glass: When the fixed part of the glass door needs to be spliced ​​by the oversize, the seam should have a width of 2-3mm, and the edge of the glass should be chamfered. 9: Dynamic glass door installation: Before the door leaf is installed, the grounding spring and the positioning pin on the top surface of the door frame should be positioned and installed. The two must be coaxial. Check the vertical line during installation to ensure the center of the ground spring shaft and the positioning pin. The lines are on the same line. 10: Install the glass door leaf upper and lower door clamps: Install the upper and lower metal door clips on the upper and lower ends of the glass door, and measure the door height. When choosing children's clothing, you should pay a little attention. The brighter the color, the more chemical elements are in the clothing, but parents don't have to worry too much. You can try a small area of color matching to play a finishing touch. However, the baby's skin is delicate, and parents should try to choose clothes that are nearly white and less colorful for their children. a cute baby pants,baby pants black,baby blue pants,black baby pants Dongguan Yumuran Garment Co.Ltd , https://www.1movingkidsjacketes.com